Seamless Auto-Maintenance
Fast, clean, and compatible with multiple brands of spray lubricant
Lubrina 2 automatically performs maintenance and lubrication of handpieces
which are essential for daily practice. Because the lubrication amount and service
time suitable for each handpiece are programmed into Lubrina 2, it can
automatically perform maintenance of up to four handpieces in a short time. The
clean air-blow system facilitates lubrication and purging of the inside of the
handpiece thoroughly, providing consistent, quality maintenance that doesn't rely
on the experience of staff during manual lubrication. Lubrina 2 accepts multiple
brands of spray lubricant.
Approximately 20 seconds per turbine
Oil usage amount is reduced to 1/4
Faster maintenance with excellent cost savings
Since the air-blow system can remove residual water completely using clean air, the efficiency of lubrication is enhanced with oil usage of only 1/4 of that compared to manual lubrication. Daily maintenance cost is therefore reduced.
In addition, the system effectively removes surplus oil, providing thorough maintenance in mere seconds.*1
Handpiece and spray compatibility
By replacing the coupling, Lubrina 2 facilitates the
maintenance of Tri Auto ZX2 and Root ZX II contraangles, air driven handpieces (ISO 9168/Type 3
joint) as well as all contra-angles and straight
handpieces (ISO 3964/E-Type joint). Lubrina 2 is
compatible with 4-hole, 5-hole, and 6-pin
connections. With its dual lubrication system, one
or two different brands of spray may be used in the
same cycle. Several brands of spray are compatible
by using an optional spray can stand adapter.
*1 Comparison with the long mode of our previous Lubrina
*2 Approximately 40 seconds for contra-angle attachments
Clean Air-Blow System
Unique double-conduit design
The Clean Air-Blow system allows the unit to operate with a separation of air and oil, unlike conventional units. By employing dual solenoid valves and a clean air dedicated conduit, the system can supply clean air without a mix of oil. During the water removal process before lubrication, the system removes the water in the head maximizing lubrication results. During idling after lubrication, the surplus oil is effectively removed by clean air.
Features
Compatible with multiple brands
Spray Lubricant Compatibility
In addition to MORITA's Multi Spray, Lubrina 2 is also compatible with other brands of lubricant including: KaVo® Spray*
,
NSK® PANA SPRAY Plus*
, YOSHIDA Spray, W&H® SERVICE Oil F1*
, Sirona® T1 Spray*
and Bien-Air® LUBRIFLUID Spray*
.
Specifications
Brand name: Lubrina 2
Model: HIM-2
Power voltage: AC 100V-240V 50-60Hz
Power consumption: 10-25 VA
Maximum input air pressure: 0.7 MPa max.
Air pressure used: 0.3-0.5 MPa (recommended 0.4 MPa)
Consumed air flow rate: 60-100 NL / min (0.3-0.5 MPa)
Weight: Approx. 17.5 lbs. (8 kg)
Dimensions (W x D x H): Approx. 12" x 12" x 14" (300 mm × 300 mm × 365 mm)
Manufactured by: J. MORITA MFG. CORP
Features:
• Clean Air-blow System (Dual solenoid valves)
• Spray can system
• Mode 1 (for turbines)
• Dual spray system
• Mode 2 (for contra-angle attachments)
• Residual water removal mechanism
• Flushing mode
• Oil mist suction mechanism
• Air-blow mode
• Chuck maintenance mechanism
• Compatible with handpieces manufactured by various companies
Warranty
Lubrina 2 comes with a 2-year warranty.
Packaging:
System includes: MORITA Lubricant Spray (2) (420ml ea), Oil Absorbent Tray Pad (1), Oil Absorbent Sheet (1), MORITA Spray Can Stands (2), Power Cord (1), Air Tube (1), Door Oil Absorbent Sheet (1), Front Door Sheet Stopper (1)
Lubrina 2 Product Number
Lubrina 2 Handpiece Maintenance System (Order no. 24-K325ENG)
